• Guaranteed food hygiene: AISI 304 stainless steel is resistant to corrosion and easy to sanitize, an essential requirement for handling food products in regulated environments.
• Space organization: the 2 shelves allow for distributing the load on multiple levels, increasing storage capacity without increasing the floor footprint.
• Curing liquid management: the 40 mm high removable collection basin collects excess liquids, preventing stagnation and keeping the work area clean.
• Safe handling: the 2 wheels with brakes allow for locking the trolley when stationary, avoiding accidental movements during loading and processing.
• Structural stability: the stainless steel support of the wheels and the balanced dimensions (1000×700 mm base) ensure a stable center of gravity even with loads distributed over several shelves.
• Durability in humid environments: AISI 304 stainless steel resists humidity and temperature variations typical of curing rooms, guaranteeing a long service life.

The trolley is designed for production and commercial contexts in the food sector. In salami factories it is used for the controlled curing of hams, speck, pancetta, and other cured meats, allowing for uniform air circulation between the levels. In butcher shops and processing laboratories, it facilitates the movement and organization of products between different work areas, from slaughtering to packaging.

Within medium and large-scale food industries, the trolley supports processing cycles that require temporary storage with liquid collection, such as smoking, marinating, or controlled curing. The collection basin proves particularly useful in environments where dripping liquids must be managed hygienically.

The trolley is the right choice when it is necessary to combine controlled curing, frequent handling, and dripping water management in a single solution. It is suitable for those operating in salami factories, butcher shops, and food industries where hygiene standards are non-negotiable and where available space must be optimized.

An essential operational prerequisite is a movement space that allows for a width of 1000 mm and a height of 1820 mm. If the production cycle involves frequent movements between curing rooms, cold rooms, or packaging areas, the presence of the brake on 2 wheels becomes a decisive element for personnel safety.

Maintenance is simplified thanks to the removable basin and stainless steel surfaces: this reduces daily and weekly cleaning times, a critical factor in environments subject to frequent hygiene inspections.

What is the difference between this trolley and one without a collection basin?

The 40 mm high removable collection basin allows for capturing excess liquids generated during curing, keeping the surrounding area clean and preventing humidity accumulation on the floor. A trolley without a basin would require placing separate containers under the shelves, reducing practicality and overall hygiene.

Is AISI 304 stainless steel compliant with European food regulations?

Yes, AISI 304 stainless steel complies with Regulation (EC) 1935/2004 regarding materials and articles intended to come into contact with food. It is suitable for both direct and indirect food use and is easily sanitizable according to HACCP protocols.

How many cured meats can be cured at the same time?

The capacity depends on the number of hanging supports installed on the 2 shelves and the maximum total weight supported by the structure. The 1000×700 mm base dimensions provide ample surface area for multiple arrangements. It is recommended to contact the manufacturer for specific indications on the maximum load per shelf.

Is it possible to stack two trolleys on top of each other?

The height of 1820 mm makes stacking difficult in environments with standard heights. For vertical storage configurations, it is necessary to verify structural strength with the manufacturer, as stacking is not a typical use for this type of trolley.

How easy is it to clean the trolley and the collection basin?

AISI 304 stainless steel is naturally resistant to alkaline and acidic detergents used in sanitization. The collection basin is completely removable, which allows for extracting it, cleaning it separately, and reinserting it quickly. The shelves are smooth and without protrusions, facilitating cleaning with pressurized water jets.

Is the brake present on all four wheels?

No, the trolley is equipped with 4 swivel wheels with stainless steel support, but only 2 of them are equipped with brakes. This configuration guarantees maneuverability during movement while maintaining stability when the trolley is positioned. If brakes are required on all wheels, contact the manufacturer to evaluate available variants.