The safety harness and vest for working at heights h1053_03 is an integrated personal protective equipment developed specifically for professionals in the construction, logistics, and road maintenance sectors. This solution addresses the operational challenge of having to wear and coordinate two separate devices in contexts at risk of falling and vehicle strikes. The yellow high-visibility vest ensures immediate visibility of the operator, while the internal harness provides the dorsal and frontal anchor points necessary for safe structural restraint at height. Equipped with leg straps with a quick-release system and available in various sizes calibrated for height and body circumference, the equipment ensures smooth donning, maximizing comfort and drastically reducing equipment setup times on site.
Technical features
Type: Fall arrest harness integrated into high-visibility vest
Closure system: Leg adjustment and closure via quick-release buckles
Size S Dimensions (Clothing 42–50): Height 1200–1650 mm, Waist circumference 600–1100 mm, Thigh circumference 300–600 mm
Size M/L Dimensions (Clothing 48–56): Height 1500–1900 mm, Waist circumference 750–1200 mm, Thigh circumference 500–750 mm
Size L/XL Dimensions (Clothing 54–62): Height 1800–2100 mm, Waist circumference 1100–1500 mm, Thigh circumference 700–900 mm
* Images are purely indicative
User benefits
Prevention of combined risks: combining the anchorage system with the fluorescent yellow fabric makes it possible to signal the worker’s presence to maneuvering vehicles while simultaneously protecting them from accidental falls.
Optimization of donning times: the two-in-one integrated architecture reduces the preparation time required before accessing the site, eliminating the need to calibrate overlapping devices.
Facilitated emergency removal: the use of quick-release mechanical systems on the lower straps facilitates the instantaneous removal of the garment at the end of the shift or during first aid procedures.
Prevention of operational snags: the containment of the harness webbing inside the vest minimizes the presence of loose straps, reducing the danger of accidental hooking on protrusions or machinery.
Calibrated postural fit: the wide dimensional range for waist, thighs, and height ensures the choice of the exact size, guaranteeing a balanced distribution of body weight that prevents harmful compression during work phases at height.
Scope of application
This integrated device is intended for intensive use in construction and road sites, aerial platforms, port areas, and freight terminals. It represents essential logistical equipment for maintenance workers, installers, sanitation workers, and airport personnel who operate near drops or at elevation, and who are simultaneously exposed to vehicle traffic or low light. It fits perfectly into all industrial scenarios where safety plans require joint compliance with fall prevention and visual signaling regulations.
Why Choose It
The h1053_03 model represents the correct operational choice for safety managers who need to rationalize the supply of PPE without compromising on worker protection. Unlike the usual layering of a reflective vest over a common harness, which often generates chafing or dangerous misalignment, this solution proves indispensable when the operational prerequisite demands maximum freedom of movement, visual order, and stability of the anchor point. It is the ideal technical option for those looking for a restraint system that is quick to attach and specifically sized for different body shapes.
FAQ
How does this solution differ from a classic harness worn over a separate high-visibility vest?
Unlike the traditional layered configuration, which frequently limits operator agility and causes safety webbing to slip, this model integrates the restraint architecture directly into the fabric of the yellow vest. This prevents straps from loosening or snagging, ensures that the rear eyelet remains locked in the correct position, and halves the time needed to put on and remove the protective equipment.
Do the anchorage systems and the vest meet the regulatory parameters for on-site protection devices?
Yes, the design of the device meets the strict parameters set for Personal Protective Equipment (PPE). The rear eyelet and safety belt are engineered to support the restraint loads required by fall arrest directives for work at height, while the bright yellow surface of the garment complies with mandatory visual signaling standards for personnel exposed to risks from vehicle traffic or low light.
Holity uses PayPal and credit transfer as methods of payment.
Credit Transfer
Paying by credit transfer the order will be handled only after a bank credit receiving confirmation. Payment must be made within 7 days from date of order. Go past the deadline, the order will be automatically canceled. The bank transfer purpose must necessarily bring the order number, the order date and client name. The products availability has to be judged only from the credited. The payment must 'be made payable to: ' NAMITI SRL '
PayPal
Selecting the type of PayPal payment, you will be redirected to a page on the PayPal site where in you can enter with your email address and password and make payment. Your financial data will not be shared with Holity but they will be handled directly by PayPal. In case of order cancellation or rejection by Holity, the amount will be refunded to your PayPal account and Holity will be not responsible for delays and / or damage during repayment.
Upon delivery of the goods the customer is required to inspect:
The number of packages delivered is as indicated in the transport document
The packaging is intact and not altered even in the closing strip
In case of tampering and / or breaks the customer will immediately challenge the shipment and / or delivery putting the word "SUBJECT TO INSPECTION FOR GOODS ....." (give reasons) on the delivery receipt from the courier.
The customer then must report any damage within 7 (seven) days of receipt of goods in the manner prescribed by the operator chosen for the expedition. In case the customer fails to collect within 2 (two) working days of the goods ordered and present in storage at the warehouses of courier and / or the Company due to the repeated inability to deliver to the address specified by the customer with the order, will return the goods to stores in Namiti Ltd., with charge to the account of charges for transport and storage of goods, the customer may request a new shipment of the goods, upon payment of these expenses and the new shipping cost.
English 
Italian
French
German
Spanish
