The h1053_02 fall arrest work harness is an essential piece of personal protective equipment (PPE) to ensure the total safety of operators working at height. Intended for construction professionals, maintenance workers, and industrial installers, this equipment addresses the need to operate in suspension or in areas at risk of falling with maximum stability and protection. Thanks to the structure in resistant 45 mm polyester webbing and the use of high-strength galvanized steel components, the device ensures exceptional structural hold. The complete adjustment system, combined with the practical quick-release closure on the lower straps, allows for an immediate and secure ergonomic adaptation to different body types, optimizing dressing times on the construction site.
Technical features
Strap/webbing material: 45 mm Polyester
Stitch type: High-strength polyester thread
Strap strength: >22 kN
Metal parts material: High-strength galvanized steel
Attachment points: Rear eyelet and front attachment (for attention/frontal anchoring)
Upper adjustment systems: Adjustable shoulder straps and height adjustment of the front collection eyelet
Central restraint system: Adjustable safety belt
Lower restraint system: Leg straps with adjustment and quick-release closure
Size S Dimensions (Clothing 42-50): Height 1200-1650 mm, Waist circumference 600-1100 mm, Thigh circumference 300-600 mm
Size M/L Dimensions (Clothing 48-56): Height 1500-1900 mm, Waist circumference 750-1200 mm, Thigh circumference 500-750 mm
Size L/XL Dimensions (Clothing 54-62): Height 1800-2100 mm, Waist circumference 1100-1500 mm, Thigh circumference 700-900 mm
* Images for indicative purposes only
User benefits
Customized and quick fit: the presence of adjustable shoulder straps and safety belt, combined with the quick-release closure on the legs, allows the device to be put on and taken off in seconds, while keeping the correct measurement stored.
Structural safety in case of a fall: the use of high-strength stitching and 45 mm straps guarantees a system tensile strength of 15 kN, effectively absorbing impact forces.
Prolonged reliability of connectors: the attachment rings in solid galvanized forged steel prevent mechanical wear and corrosion, ensuring always secure anchoring even in harsh working environments.
Balanced load distribution: the combination of the rear eyelet with the height-adjustable front attachment point allows weight and tension to be correctly balanced, preventing localized suspension trauma.
Guaranteed adaptability to body shape: the availability of three different sizes (S, M/L, L/XL) with specific and wide tolerance ranges for height, waist, and thigh ensures that every operator can work in maximum comfort.
Scope of application
This fall arrest harness is specifically designed for intensive use within construction sites, industrial sites, aerial platforms, scaffolding, and rope access work. It constitutes the fundamental technical equipment for masons, specialized operators, installers, and maintenance workers who face the risk of falling from height daily. It proves to be an indispensable tool in all those situations where it is necessary to operate with both hands free, while guaranteeing a stable and certified anchoring to the lifelines or structural restraint points provided for by safety plans.
Why Choose It
The h1053_02 model represents the ideal technical choice for safety coordinators and companies that need to provide their personnel with a device that is easily adjustable, quick to put on, and structurally flawless. Unlike basic harnesses with traditional pass-through buckle closures, this device stands out for its quick-release leg closure and front height adjustment, essential requirements to facilitate work when operators must equip themselves frequently or adapt the PPE to seasonal clothing volumes. The exclusive use of galvanized forged steel also ensures extraordinary operational longevity.
FAQ
How does this harness differ from standard models with pass-through straps?
Unlike traditional models that require the operator to manually thread and pull the leg straps each time, the h1053_02 model is equipped with a practical quick-release closure. This mechanical system allows the thigh width to be calibrated the first time and subsequently use the snap closure to put on or remove the harness instantly, optimizing operational times and avoiding tightening errors on the worksite.
Do the system and materials used meet the strength requirements for fall protection devices?
Yes, the device is engineered using exclusively high-performance materials, such as polyester straps with a strength greater than 22 kN and galvanized forged steel attachment rings. The structure as a whole guarantees a system tensile strength of 15 kN, rigorous and necessary mechanical characteristics to comply with current safety directives regarding Personal Protective Equipment (PPE) for work at height.
Holity uses PayPal and credit transfer as methods of payment.
Credit Transfer
Paying by credit transfer the order will be handled only after a bank credit receiving confirmation. Payment must be made within 7 days from date of order. Go past the deadline, the order will be automatically canceled. The bank transfer purpose must necessarily bring the order number, the order date and client name. The products availability has to be judged only from the credited. The payment must 'be made payable to: ' NAMITI SRL '
PayPal
Selecting the type of PayPal payment, you will be redirected to a page on the PayPal site where in you can enter with your email address and password and make payment. Your financial data will not be shared with Holity but they will be handled directly by PayPal. In case of order cancellation or rejection by Holity, the amount will be refunded to your PayPal account and Holity will be not responsible for delays and / or damage during repayment.
Upon delivery of the goods the customer is required to inspect:
The number of packages delivered is as indicated in the transport document
The packaging is intact and not altered even in the closing strip
In case of tampering and / or breaks the customer will immediately challenge the shipment and / or delivery putting the word "SUBJECT TO INSPECTION FOR GOODS ....." (give reasons) on the delivery receipt from the courier.
The customer then must report any damage within 7 (seven) days of receipt of goods in the manner prescribed by the operator chosen for the expedition. In case the customer fails to collect within 2 (two) working days of the goods ordered and present in storage at the warehouses of courier and / or the Company due to the repeated inability to deliver to the address specified by the customer with the order, will return the goods to stores in Namiti Ltd., with charge to the account of charges for transport and storage of goods, the customer may request a new shipment of the goods, upon payment of these expenses and the new shipping cost.
English 
Italian
French
German
Spanish
