mon-fri 9-13 / 14.30-18.30
Electric maintenance, inflation and charging station for plus bikes 230 volts. Available in several color variants. Retractable tool set. Material: anticorodal aluminum.
Maintenance, inflation and charging station for E-bikes compatible with every type of bicycle, with two Schuko IP65 230 volts sockets and a 0.03 A magneto-thermal residual current circuit breaker. Lightweight and robust structure, resistant to damage caused by atmospheric agents, thanks to its composition in anticorodal aluminum and stainless steel hardware. Covering is recommended during the winter period if not in use, and periodic lubrication of the pump rod is recommended. Ideal for installation along roads and near cycle paths, in outdoor spaces that allow cyclists needing maintenance, inflation, charging and/or repair of their vehicle to stop. Equipped with a tire inflation pump, compatible with all types of valves (max 8 bar) and a pressure gauge that allows for tire pressure monitoring. The pressure gauge provides a clear reading as it is in a "glycerine" bath, thanks to which condensation is avoided. The station is also equipped with a set of retractable tools functional for maintenance. The base of the structure has 4 holes Ø 11 with fixing plugs provided for securing the base to the ground. Anti-theft caps are available on request. Use of the station is immediate: place the bicycle saddle on the support arm of the structure to favor vehicle suspension, making every component easily accessible for maintenance, possible through the tool set that returns to its place once used via a cable retraction system. The product is available in three color variants.
Technical features:
* The electrical connection must necessarily be carried out by a professional electrician.
* Upon request, it is possible to request the customization of the station with customer’s graphics.
| Length in millimetres | 440.00 |
|---|---|
| Height in millimetres | 1,506.00 |
| Operation | Accesso libero |
| Depth in millimetres | 300.00 |
| Strengths | Con attrezzi di manutenzione, Con kit gonfiaggio |

Holity uses PayPal and credit transfer as methods of payment.
Credit Transfer
Paying by credit transfer the order will be handled only after a bank credit receiving confirmation.
Payment must be made within 7 days from date of order. Go past the deadline, the order will be automatically canceled. The bank transfer purpose must necessarily bring the order number, the order date and client name.
The products availability has to be judged only from the credited.
The payment must 'be made payable to: ' NAMITI SRL '
PayPal
Selecting the type of PayPal payment, you will be redirected to a page on the PayPal site where in you can enter with your email address and password and make payment.
Your financial data will not be shared with Holity but they will be handled directly by PayPal.
In case of order cancellation or rejection by Holity, the amount will be refunded to your PayPal account and Holity will be not responsible for delays and / or damage during repayment.
Upon delivery of the goods the customer is required to inspect:
In case of tampering and / or breaks the customer will immediately challenge the shipment and / or delivery putting the word "SUBJECT TO INSPECTION FOR GOODS ....." (give reasons) on the delivery receipt from the courier.
The customer then must report any damage within 7 (seven) days of receipt of goods in the manner prescribed by the operator chosen for the expedition. In case the customer fails to collect within 2 (two) working days of the goods ordered and present in storage at the warehouses of courier and / or the Company due to the repeated inability to deliver to the address specified by the customer with the order, will return the goods to stores in Namiti Ltd., with charge to the account of charges for transport and storage of goods, the customer may request a new shipment of the goods, upon payment of these expenses and the new shipping cost.