The work harness with 5 attachment points h1046_09 is a high-performance full work harness developed for rope access operators, technicians specialized in work at height, rescuers, and demanding industrial professionals. This device responds to the need to operate in total safety during complex maneuvers in suspension, positioning, restraint, and fall arrest. The system solves the operational problem of maintaining maximum worker comfort during long rope suspension sessions, ensuring at the same time excellent traceability for periodic inspections and the total absence of elements that can be accidentally opened, except through dedicated tools. Characterized by a belt with wide ergonomic padding for lumbar support and by back and lower parts in bright colors to ensure high visibility, this top-of-the-range solution joins the upper and lower part via an openable ring provided. It also integrates an NFC chip for digital management of controls and snap-foldable side attachment points, ensuring high-level anatomical and functional adaptability.
Technical features
Product type: full work harness with 5 attachment points for rope access work
Regulations and certification standards: EN 361, EN 358, EN 813
Functional attachment points: 5 total attachment points (ventral for suspension or positioning, lateral for positioning, sternal or dorsal for restraint and fall arrest)
Mechanical test loads: tested to 150 kg according to EN 813
Digital management and traceability: equipped with an integrated NFC chip to facilitate product traceability and speed up periodic inspections
Hardware safety and openable elements: version without openable elements except with dedicated tools
Structural connection system: connection between upper and lower part via openable ring (provided)
Accessory compatibility: compatible with the application of a ventral ascender
Ascender attachment positioning: ventral ascender attachment in an off-center position so as not to interfere with other devices connected to the ventral attachment point
Leg loop configuration: closed leg loops adjustable via pass-through buckles
Lumbar support and ergonomics: extensively padded with ergonomic padding on the belt
Dorsal attachment: adaptable to the curvature of the back to facilitate dragging on the ground during evacuation and improve comfort when sitting or under a jacket
Gear loop equipment: 5 total gear loops (two rigid shaped front loops, three flexible rear/lateral loops to improve sitting comfort)
Side attachment mechanism: snap-foldable side attachment points
PPE visibility: bright colors used in the back and lower parts for high visibility
Adjustment systems: adequate number of adjustments useful to adapt to the body shape
Size variants and geometric parameters:
Size XS: weight 2100 g, waist measurement 78/92 cm, leg loops measurement 48/58 cm
Size S/M: weight 2150 g, waist measurement 90/115 cm, leg loops measurement 55/65 cm
Size L: weight 2200 g, waist measurement 100/130 cm, leg loops measurement 60/70 cm
* Images for illustrative purposes only
User benefits
Reduction of lumbar fatigue at height: The wide ergonomic padding of the belt distributes the load optimally on the lumbar area, ensuring optimal support during prolonged work in suspension.
Digitalized inspections and traceability in record time: The presence of the integrated NFC chip allows the harness to be uniquely identified via reader, speeding up mandatory periodic safety checks.
Absolute prevention of accidental openings: The absence of elements that can be opened without dedicated tools eliminates the risk of accidental detachment of components during movements, raising the level of structural safety for the technician.
Optimized comfort in a sitting position: The combination of the three flexible rear gear loops and the dorsal attachment that follows the curvature of the back prevents painful compressions when the operator is seated.
Smooth management of ventral devices: The off-center position of the ventral ascender attachment avoids physical interference and overlapping with other connectors inserted in the same point, making maneuvers fluid.
Facilitation of ground evacuation maneuvers: The geometry of the dorsal attachment follows the body profile, reducing friction and facilitating the dragging of the operator in case of rescue and emergency recovery.
Scope of application
This full work harness finds its optimal application in the execution of interventions at height managed by rope access technicians, lifeline installers, industrial maintenance workers, tower and metal structure operators, and technical or speleological rescue teams. Thanks to the EN 361, EN 358, and EN 813 certifications and compatibility with ventral ascenders, it is the ideal tool for acrobatic construction work, wind turbine maintenance, cleaning of continuous glass walls on skyscrapers, work in confined spaces, and restraint and fall arrest maneuvers in which the sizing configuration (from XS to L) ensures a snug and stable protection for the operator.
Why Choose It
The h1046_09 model is the correct choice when the safety protocol for work at height requires a top-of-the-range full harness equipped with 5 stable attachment points, native NFC chip for control digitalization, and a resistance tested up to 150 kg. It proves preferable to standard positioning harnesses since the total absence of manually openable elements and the connection ring openable via dedicated tools offer impenetrable protection against errors of use in demanding professional contexts. Choosing this device developed and produced in Italy means equipping workers with a high-visibility system chromatically differentiated, comfortable to wear even under a jacket and compliant with the precise biometric parameters of waist and leg loops specified.
FAQ
How does the gear loop configuration of this harness differ from a standard model with entirely rigid loops?
Standard models equipped only with rigid loops can cause strong discomfort, compression, or hindrance to movement when the operator is in a sitting position or works in very narrow spaces. The h1046_09 harness solves this operational problem by integrating 5 gear loops with a mixed structure: the two front ones are rigid shaped to allow quick and precise attachment of frequently used equipment, while the other three rear and side ones are made of flexible material to follow the lines of the body, optimizing comfort while sitting.
What certifications does this PPE for work at height have and how is the periodic verification of the devices managed?
As indicated in the description, the harness is certified and approved according to European standards EN 361 (fall arrest systems), EN 358 (positioning and restraint systems), and EN 813 (belts with leg loops for suspension). Furthermore, the device is tested to withstand a maximum load of 150 kg in compliance with EN 813. To simplify the legal obligations regarding periodic inspections, the structure includes an integrated NFC chip that allows for quick digital reading of the product’s history and data, eliminating manual verification times.
Holity uses PayPal and credit transfer as methods of payment.
Credit Transfer
Paying by credit transfer the order will be handled only after a bank credit receiving confirmation. Payment must be made within 7 days from date of order. Go past the deadline, the order will be automatically canceled. The bank transfer purpose must necessarily bring the order number, the order date and client name. The products availability has to be judged only from the credited. The payment must 'be made payable to: ' NAMITI SRL '
PayPal
Selecting the type of PayPal payment, you will be redirected to a page on the PayPal site where in you can enter with your email address and password and make payment. Your financial data will not be shared with Holity but they will be handled directly by PayPal. In case of order cancellation or rejection by Holity, the amount will be refunded to your PayPal account and Holity will be not responsible for delays and / or damage during repayment.
Upon delivery of the goods the customer is required to inspect:
The number of packages delivered is as indicated in the transport document
The packaging is intact and not altered even in the closing strip
In case of tampering and / or breaks the customer will immediately challenge the shipment and / or delivery putting the word "SUBJECT TO INSPECTION FOR GOODS ....." (give reasons) on the delivery receipt from the courier.
The customer then must report any damage within 7 (seven) days of receipt of goods in the manner prescribed by the operator chosen for the expedition. In case the customer fails to collect within 2 (two) working days of the goods ordered and present in storage at the warehouses of courier and / or the Company due to the repeated inability to deliver to the address specified by the customer with the order, will return the goods to stores in Namiti Ltd., with charge to the account of charges for transport and storage of goods, the customer may request a new shipment of the goods, upon payment of these expenses and the new shipping cost.
English 
Italian
French
German
Spanish