• Absolute safety in case of unknown fluids: The special universal and protected chemical composition of the internal materials allows for immediate intervention on the leak even when the exact chemical nature of the spilled liquid is unknown, minimizing hesitation time.
• Chemical neutralization certified by the Polytechnic University: The system combines absorbent action with official laboratory tests certifying the blockage and inerting of sulfuric acid (density 1.27 Kg/dm³), converting a corrosive threat into a solid residue safe to remove.
• Ultra-fast manual emergency response (PP Case): The extremely compact dimensions (40x29.5 cm) and integrated handle allow any operator to grab the case and rush to the spill site in seconds, stopping contamination at its source.
• Yellow color coding for chemical risk: The bright yellow color of the pads, sock, and pillow immediately identifies the area as a chemical hazard zone within the plant, alerting passing personnel.
• Perimeter isolation and drain prevention: The flexible sock placed around the oil or acid stain blocks the expansion of the flow on the floor, sealing the area and preventing the toxic contaminant from entering manholes or drains.
• High-capacity sheets for extensive spills: The 20 special pads included capture caustic liquids with extreme fluidity and without falling apart, ensuring the removal of large quantities in a very short time and without releasing fibers.
• Toxic waste management included: The provided heavy-duty collection bag allows for temporary storage of saturated and solidified pads and powders, sealing in harmful vapors and preparing the material for disposal according to law.

This spill kit in a carrying case finds its optimal and recommended application within chemical and pharmaceutical analysis laboratories, universities, research institutes, auto electricians’ workshops, forklift charging rooms, paint or solvent storage warehouses, and hospital aisles. Thanks to its reduced dimensions of 40x29.5x13 cm, it is ideal for being stored inside technical department cabinets, wall-mounted at aggressive fluid transfer points, or kept directly on board industrial service and maintenance vans.

Model h1045_08 is the correct choice when company safety procedures (DVR) require a portable, lightweight emergency device highly specialized in the neutralization of unknown acids, bases, and toxic liquids. Compared to large static drums, this configuration in a PP carrying case guarantees immediate mobility and concentrates in minimal space a technical equipment certified by the Polytechnic University of Turin (20 special sheets, sock, pillow, and 1.5 kg of neutralizing granules). Choosing this kit allows companies to perfectly comply with environmental protection decrees (Legislative Decree 152/06 and Ministerial Decree 20/2011), ensuring worker safety through a guided procedure that eliminates the risk of uncontrolled chemical reactions on the ground.

What are the sequential steps to follow in the event of an aggressive chemical liquid spill?

In case of emergency, the official procedure involves five mandatory steps: 1) Protection of people: evacuate the contaminated area, close doors, and ventilate the rooms by opening windows; immediately wear the included protective gloves. 2) Situation assessment: determine the nature of the fluid using M.S.D.S. safety data sheets (in case of doubt, wear the maximum level of P.P.E.). 3) Containment: circumscribe the area by laying out the yellow sock to block expansion and stop the leak at the source. 4) Remediation: apply the neutralizing powder, place the pillow under drips, and lay the 20 yellow sheets on the liquid. 5) Collection: once saturated, place all residues in the waste collection bag provided in the kit.

What does the Polytechnic University of Turin Report certify for this specific spill kit?

Report L.M.DSMIC n° 13/16/2011 issued by the Polytechnic University of Turin certifies the real chemical absorption and abatement capabilities of the kit in the presence of highly dangerous substances. Specifically, it states that just 0.118 kg of internal absorbent material is sufficient to encapsulate, neutralize, and permanently retain 1 liter of concentrated sulfuric acid (with a density equal to 1.27 Kg/dm³), offering a scientific guarantee of effectiveness essential for inspections by control bodies.

Can the yellow sheets and granules included in the case also be used for common industrial liquids?

Yes. Although the kit is engineered to withstand and neutralize the most aggressive, toxic, acidic, and alkaline chemical liquids, the universal nature of its components also makes it excellent for absorbing general industrial liquids such as lubricating oils, coolants, fuels, aqueous solutions, and antifreeze. It therefore represents the ultimate safety solution even when a leak is found in a workshop area and there is no absolute certainty as to what liquid it is.