• Certified neutralization of acid risk: The specific powder tested by the Polytechnic University of Turin transforms highly corrosive sulfuric acid into an inert solid residue, eliminating the chemical danger of the substance directly on the workshop floor.
• Full compliance with Ministerial Decree 20/2011 for charging rooms: The calibrated presence of 13.5 kg of powder ensures the ability to extinguish and neutralize the entire volume of 25 liters of acid solution required by law, protecting the company from disputes or inspection sanctions.
• Dual-function intervention versatility: Thanks to the simultaneous presence of universal granules and fine fiber pads, personnel can manage both a common leak of lubricant or coolant and an aggressive chemical spill with the same kit.
• Immediately safe and non-slip flooring: The fine granular absorbent dries and thoroughly cleans the ground, eliminating the slippery film of oils and organic liquids, drastically reducing the risk of accidents from falling or slipping of handling equipment.
• Rapid perimeter containment with universal socks: The 3 socks of 120 cm allow the spread of the polluting fluid to be restricted as soon as the leak occurs, preventing the expansion from reaching drainage channels or manholes.
• Watertight and durable material insulation: The case with sliding lid protects hygroscopic powders, pads, and PPE from humidity, dust, and splashes, guaranteeing the perfect effectiveness of the chemical reagents until the moment of use.

This emergency spill kit finds its optimal application within electric forklift charging rooms, auto electrician workshops, exhausted battery storage depots, chemical and industrial laboratories, maintenance departments, and pallet truck transit aisles. It is the binding and indispensable safety device to be positioned near workbenches where the handling, replacement, or topping up of acid elements of starter batteries is carried out, guaranteeing immediate protection of the company floor and maximum safety of internal and external water networks.

The h1045_07 model is the correct choice when the company safety and prevention plan must simultaneously respond to environmental regulations on workshop liquids (Legislative Decree 152/06) and the obligation to hold neutralizing substances for sulfuric acid (Ministerial Decree 20/2011). It represents the ideal integrated solution compared to the separate purchase of bulk products, as it concentrates in a single compact 60x40x32 cm case a complete emergency laboratory (powder tested by the Polytechnic University of Turin, non-slip granules, fine fiber pads, and barriers). Choosing this kit allows for the management of critical events involving both non-aggressive substances and corrosive acids, guiding the operator through clear methods of use and excluding the uncontrolled dispersion of dangerous waste.

What is the difference in use and chemical behavior between the two types of granules contained in the kit?

The two granules respond to opposite operational needs. The universal fine absorbent has a purely mechanical and non-slip function, designed to dry and clean floors from non-aggressive liquids such as oils, coolants, and solvents. The specific powder for battery acid instead acts through an exothermic and effervescent chemical reaction on contact with sulfuric acid, generating a complete neutralization that leads to the solidification of the substance for safe removal.

What official certifications and tests validate the effectiveness of the acid and universal granules in the case?

The neutralizing powder for battery acid is officially approved and tested by the Polytechnic University of Turin according to Report L.M.DISAT No. 13/14/2012, which certifies the precise absorption ratios (0.54 kg of product per 1 liter of acid). The universal absorbent granules are instead fully compliant with the European standard Eu CEN TS 15366:2010 for road and industrial safety and the Fr NF P 98 190 standard for non-slip properties.

How should the operator intervene in case of a spill of aggressive and corrosive liquids compared to common ones?

For common non-aggressive liquids, it is sufficient to lay out the socks, use the sheets, and apply the universal granules to dry the surface. In the case of aggressive and acidic liquids, the operator must wear PPE (gloves and mask), apply the neutralizing powder starting from the outer periphery of the spill to reach the inside, wait for the completion of the effervescent reaction and the total solidification of the powder, and then collect everything with the help of the 3 included bags.