• Operational ergonomics: the foot control eliminates the need to apply manual lifting force, reducing the operator’s biomechanical load and preventing strain injuries
• Adjustable working height: the lifting stroke of 375-870 mm allows positioning the stretcher at the optimal ergonomic height, adapting to different work configurations
• Stability and safety: the wide stainless steel structure and double braking system ensure controlled movements and secure stopping, minimizing risks of slipping or unwanted shifting
• Ease of handling: the 4 swivel wheels with 200 mm diameter allow smooth passage on all types of flooring, reducing resistance during translation
• Hygiene and longevity: the stainless steel resists corrosion, disinfectants, and humid environments, ensuring minimal maintenance and compliance with medical hygiene standards
• Low weight: the 28.5 kg self-weight allows rapid and reversible movements even in tight spaces, without compromising on load stability up to 350 kg

The trolley is intended for mortuary, forensic, and body preservation facilities, where the regular and controlled handling of stretchers and coffins represents a daily operational necessity. It is used in mortuaries, forensic medicine laboratories, burial facilities, and professional funeral services.

The adaptability to different types of flooring (tiles, resin, concrete, marble) makes it suitable for refrigerated environments and areas with high hygiene standards. Compatibility with the optional stretcher transforms it into a complete solution for the integrated management of the deceased, from the mortuary to preparation.

Choose this trolley when operational safety and ergonomics are a priority over construction simplicity. It is the correct solution if the operator must handle frequent loads in repeated cycles, where manual fatigue represents a concrete risk. The stainless steel structure is an essential prerequisite in environments subject to chemical disinfection, controlled humidity, or intensive cleaning.

It is indicated in high-standard professional contexts, where equipment deterioration must be minimized and regulatory compliance with hygiene protocols is non-negotiable. The 350 kg capacity and lifting stroke cover almost all coffins and stretchers in use in the funeral and medical sectors.

What is the difference between the standard trolley and the trolley with optional stretcher?

The standard trolley is an autonomous lifting and transport unit with a 350 kg capacity. The optional stretcher transforms the trolley into an integrated solution: the stainless steel tray acts as a permanent work surface, the telescopic handles facilitate gripping, and the 100 mm front wheels with rear feet add an autonomous handling mode for the stretcher. The stretcher has its own capacity of 300 kg and standardized dimensions (L. 202 × W. 565 × H. 160 mm).

Can the trolley be used in environments with acidic disinfectants?

Yes. Stainless steel is naturally resistant to disinfectants commonly used in medical and funeral fields (alcohols, diluted chlorine, quaternary ammonium). However, it is recommended to avoid prolonged immersion in concentrated solutions and to dry the parts after cleaning to prevent salt build-up. Consult the specific technical sheet for the stainless steel used for compatibility with undiluted strong acid-based disinfectants.

How does the braking system work?

The trolley is equipped with a double braking system: a first brake acts directly on the wheel axis, a second blocks the rotation axis of the swivel bracket. This double mechanism prevents both wheel sliding and unwanted turret rotation, ensuring a total stop on sloping floors.

What is the optimal working height when the trolley is raised?

The maximum height of 870 mm (measured from the floor) positions the stretcher at an ergonomic height compatible with that of a standard work table. The minimum height of 375 mm allows easy access to confined spaces or low-level storage structures. The total stroke of 495 mm allows adaptation to different environment configurations and operator preferences.

Does the self-weight of 28.5 kg limit the manual transport of the trolley?

The weight is contained and manageable for a single operator over short distances. For frequent handling over long distances or stairs, the help of a second operator or the evaluation of dedicated transport solutions is recommended. The weight is mainly concentrated in the base to ensure stability under maximum load.

What regulatory standards does the trolley meet?

The trolley is designed to operate in compliance with safety standards for handling equipment (ISO 4414 for hydraulic systems) and medical hygiene requirements. The stainless steel structure meets biocompatibility and corrosion criteria according to EN 10088. Consult the manufacturer’s certification for compliance with specific regional and international regulations in the funeral and forensic sector.