• Hygienic fluid management: the drainage hole with a dedicated container eliminates risks of environmental contamination and facilitates post-use cleaning operations.
• Controlled mobility: the 4 swivel wheels and 2 brakes allow for precise maneuvers in confined spaces and secure locking during operations.
• Rapid sanitization: the AISI 304 stainless steel monobloc structure allows for complete decontamination without critical areas that are difficult to clean.
• Load safety: the containment edge and the attachable lid keep the body stable during transport, in compliance with health regulations.
• Certified durability: AISI 304 stainless steel according to EN 14301 guarantees corrosion resistance and long operational life in humid and acidic environments.

The stretcher is intended for use in hospital mortuaries, public and private healthcare facilities, morgues, body processing areas, and funeral homes. It is used for internal transport and movement between departments, as well as for decontamination operations and temporary storage in environments subject to strict hygienic-sanitary regulations.

It finds application in contexts where biological fluid management is an operational priority and where a high frequency of daily sanitization cycles is required.

Choose this stretcher when a device compliant with European standards (EN 14301) is needed that integrates fluid management without resorting to additional external systems. It is the correct solution for hospital and funeral facilities where the frequency of use is high and sanitization efficiency is critical.

It is the appropriate choice when space is limited, thanks to its compact dimensions (70 cm depth) and the maneuverability guaranteed by the swivel wheels with brakes. It is indispensable in body protocol procedures where containment and stability during transport are explicit regulatory requirements.

It is not suitable for external transport on irregular terrain; it remains optimal for controlled indoor environments and flat flooring.

What is the difference between this stretcher and models without a drainage system?

Standard transport stretchers do not include a drainage hole and a fluid container, requiring the use of additional devices (external absorbent pads). This model integrates the drainage system, reducing decontamination times and eliminating environmental contamination risks during operations.

Does it comply with European regulations for use in healthcare facilities?

Yes, the stretcher is made of AISI 304 stainless steel certified according to EN 14301, a specific regulation for stainless steel support surfaces intended for the medical and hospital sector. This certification guarantees resistance to chemical corrosion during disinfection cycles and biocompatibility.

How much time is needed for complete sanitization?

The monobloc stainless steel structure without critical crevices allows for sanitization by immersion or with steam systems in 15–20 minutes, with subsequent drying. Times depend on the specific protocol of the facility, but the simple geometry guarantees a significant reduction compared to models with critical areas.

Are the wheels with brakes easily replaceable?

Yes, the wheel system has been designed to allow rapid replacement in case of wear or damage. Routine maintenance includes periodic checks of swiveling and the brake, without the need to dismantle the entire structure.

Can it also be used for external transport?

The stretcher is suitable for internal transport on flat and controlled floors. For external routes on irregular terrain or with steep slopes, it is not recommended, as the Ø 150 mm wheels do not offer the necessary stability and the fluid container may not be adequately protected from impacts.