mon-fri 9-13 / 14.30-18.30
Emergency trolley in non-magnetic AISI 304 stainless steel. Dimensions: W.890xD.630xH.1040 mm
Emergency trolley structure made of AISI 304 SB stainless steel, 10/10 thickness, washable and disinfectable, hygienically safe. Top work surface entirely made of AISI 304 SB stainless steel, stain-resistant and scratch-resistant, easy to clean, washable and disinfectable, dimensions 660x550x60 h mm, with perimeter containment edge on three sides. Defibrillator-electrocardiograph holder platform in AISI 304 SB stainless steel, dimensions 550x450 mm, 360° swiveling with locking via knob in the chosen position, containment rail and holes for attaching monitor locking straps. Front part pull-out drawers entirely made of AISI 304 SB stainless steel, sliding on stainless steel guides; complete with recessed ABS handle, ergonomic and anti-trauma with end-of-travel block. Closure of the flap drawers via security seals (a pack of 100 numbered security seals is included). Left side: additional pull-out worktop in AISI 304 SB stainless steel, complete with end-of-travel stop and locking in closed position. 3 stainless steel compartments for objects, dimensions 280x145x250 h mm with containment rail. Recessed AISI 304 stainless steel compartment for 3-5-7 l oxygen cylinder complete with rail. Right side ergonomic and anti-trauma push handle in aluminum with plastic terminals. Waste bin in AISI 304 SB stainless steel. AISI 304 SB stainless steel support for vacuum holder, dimensions 450x180x80 h mm. Plexiglass CPR board, complete with supports. Base 4 PVC corner bumpers non-marking. 4 swivel wheels in solid rubber, mounted on bearings, Ø 125 mm, of which 2 with brakes and 2 antistatic.
Technical features:
Standard drawer configuration:
Accessories included:
*purely indicative image
The h564_84 non-magnetic emergency trolley is also available on the MEPA portal. Find out how to find our company on the Public Administration portal.
| Height in millimetres | 1,040.00 |
|---|---|
| Depth in millimetres | 630.00 |
| Width in millimetres | 890.00 |
| Material | Steel |

Holity uses PayPal and credit transfer as methods of payment.
Credit Transfer
Paying by credit transfer the order will be handled only after a bank credit receiving confirmation.
Payment must be made within 7 days from date of order. Go past the deadline, the order will be automatically canceled. The bank transfer purpose must necessarily bring the order number, the order date and client name.
The products availability has to be judged only from the credited.
The payment must 'be made payable to: ' NAMITI SRL '
PayPal
Selecting the type of PayPal payment, you will be redirected to a page on the PayPal site where in you can enter with your email address and password and make payment.
Your financial data will not be shared with Holity but they will be handled directly by PayPal.
In case of order cancellation or rejection by Holity, the amount will be refunded to your PayPal account and Holity will be not responsible for delays and / or damage during repayment.
Upon delivery of the goods the customer is required to inspect:
In case of tampering and / or breaks the customer will immediately challenge the shipment and / or delivery putting the word "SUBJECT TO INSPECTION FOR GOODS ....." (give reasons) on the delivery receipt from the courier.
The customer then must report any damage within 7 (seven) days of receipt of goods in the manner prescribed by the operator chosen for the expedition. In case the customer fails to collect within 2 (two) working days of the goods ordered and present in storage at the warehouses of courier and / or the Company due to the repeated inability to deliver to the address specified by the customer with the order, will return the goods to stores in Namiti Ltd., with charge to the account of charges for transport and storage of goods, the customer may request a new shipment of the goods, upon payment of these expenses and the new shipping cost.