mon-fri 9-13 / 14.30-18.30
A wall-mounted changing table is a space-saving solution for creating a changing area in restaurants, hotels, shopping malls, airports, stations, hospitality facilities, and other restrooms open to the public. Folding models remain closed against the wall when not in use and open only when changing. To choose the right product, you need to consider orientation, open and closed dimensions, declared load capacity, material, opening system, safety belt, and characteristics of the wall on which it is installed.
A horizontal changing table provides the changing surface primarily in width and generally protrudes less toward the center of the room when open. A Holity model, for example, measures approximately 89.5 cm wide and 48.9 cm deep.
A vertical changing table, on the other hand, takes up less linear space on the wall but requires greater front depth when in use. The range includes vertical models with open depths of around 86-89 cm.
Before purchasing, measure both the available wall and the space required in front of the open changing table, considering doors, sanitary fixtures and passages.
One of the main advantages of the wall-mounted folding changing table is the reduced space it takes up when not in use. Some Holity HDPE models have a depth of around 8.5-10.2 cm when closed, while versions in wood or HPL can exceed 20 cm.
The definition of “space-saving” alone is therefore not sufficient: always compare the closed depth and the open depth in the technical data sheet.
The category includes changing tables in HDPE, ABS, polypropylene, multiplex wood with HPL and configurations that use stainless steel or aluminium. The choice depends on the frequency of use, the environment and the expected cleaning procedures.
Plastic materials allow for shaped surfaces and relatively lightweight products. Wood and HPL are also used when a finish closer to the room's furnishings is sought, while metal versions are mainly present in more robust professional configurations.
Do not assume that a material is compatible with every detergent or disinfectant: follow the manufacturer's instructions.
Many professional changing tables have an adjustable belt and a shaped surface with side edges. Various models also use pistons, springs or other systems that control the movement of the table during opening and closing.
These features vary from product to product. The presence of the belt does not replace adult supervision and the child must not be left unattended on the changing table.
The load capacity is not the same for all wall-mounted changing tables. The Holity range includes models suitable for children up to approximately 11 kg, products with a load capacity of 15 kg and professional changing tables tested for significantly higher loads.
A high structural load does not mean that the product is intended for children of any weight or age. For use, the intended use, limits and instructions declared by the manufacturer must be respected.
Some specific Holity changing tables use Microban technology or other antibacterial treatments incorporated into the material. However, this is not a common feature across the entire category.
An antimicrobial treatment does not replace cleaning the surface between uses. Frequency, cleaning product and maintenance methods must be defined based on the changing table instructions and the facility's procedures.
Safety also depends on the fixing. The wall, anchoring system and mounting height must be compatible with the weight of the product, the expected load and the manufacturer's instructions.
There is no single anchor or universal measurement valid for all changing tables. On plasterboard or lightweight walls, a suitably designed reinforcement structure may be necessary; on masonry, fixings must be chosen based on the actual support.
Before assembly, also check the space required for complete opening and the absence of interference with doors, sanitary fixtures and other accessories.
UNI EN 12221:2026 has been in force since 2026, relating to the safety requirements and test methods for changing tables and changing mats for domestic use. The new edition replaces the previous parts 1 and 2.
In the Holity catalogue, some products declare conformity to previous versions of EN 12221 or report additional certifications. For professional supplies or specifications, it is therefore necessary to check the updated documentation for the specific product code without automatically attributing the same certification to the entire category.
For high-traffic structures, it may be useful to favour easy-to-clean models, with controlled opening and small overall dimensions. In hotels, restaurants and structures where aesthetic integration is also important, wood, HPL or metal finishes may be considered instead.
Explore Holity wall-mounted changing tables and compare configuration, dimensions, material, load capacity, opening system and available accessories.
Request a personalised quote for supplies intended for hospitality facilities, public places, institutions and contract projects.
The horizontal one requires greater width on the wall but generally less front depth. The vertical one takes up less width, but can protrude further into the room when open.
It depends on the model. Some plastic versions go down to around 8-10 cm, while configurations in wood, HPL or metal can have greater depths.
There is no universal load capacity. You must use the limit and intended use declared for the specific changing table.
It depends on the wall structure and the reinforcement system. It should not be simply fixed to the sheet without checking the capacity of the support and installation instructions.
No. Microban and other antibacterial treatments are only available on certain models and do not replace normal cleaning procedures.
No. The data sheets may show different versions or certifications. When compliance is a purchase requirement, it is necessary to check the updated documentation for the specific item.
English 
Italian
French
German
Spanish