mon-fri 9-13 / 14.30-18.30
Notice board with heat-treated pine roof, 200 x 100 cm birch panel and ground anchoring. Overall dimensions 248 x 44 x 225 cm.
To know shipping costs, add the product to your cart
Delivery Times 15-18 days
Mon-Fri 9-13 / 14:30-18:30
The trail notice board with heat-treated pine wood roof is an element of urban furniture intended for the creation of information points along nature trails, tourist routes and inside parks. It allows for the display of communications and descriptions of the territory in a dedicated location for consultation by visitors.
The structure consists of heat-treated pine wood posts and boards, which replaces the autoclave-impregnated Nordic pine of the original description. The protective roof is placed above the display surface.
The notice board is equipped with a phenolic-glued birch plywood panel, 16 mm thick, specifically treated for outdoor use. The posting surface measures 200 cm in width and 100 cm in height and is intended for the display of information material.
The laminated posts are equipped with galvanized brackets for ground anchoring. All fasteners are made of stainless steel and protected by polyethylene rings and caps.
The overall dimensions indicated in the technical list are 248 x 44 x 225 cm. In the initial description, the same numerical sequence appears expressed in millimeters: the unit of measurement must therefore be confirmed before purchase.
Note: The actual dimensions and weight of the product may vary slightly from the indicated values. It is also necessary to verify the unit of measurement of the overall dimensions, which is reported inconsistently in the original text.
* Image for illustrative purposes only. The actual product may differ from what is shown and may not 100% reflect the image.
| Material | legno |
|---|---|
| typology | monofacciale |
| Fixing | su palo |
| Height in millimetres | 2,250.00 |
| Width in millimetres | 2,480.00 |
| Depth in millimetres | 440.00 |
Holity uses PayPal and credit transfer as methods of payment.
Credit Transfer
Paying by credit transfer the order will be handled only after a bank credit receiving confirmation.
Payment must be made within 7 days from date of order. Go past the deadline, the order will be automatically canceled. The bank transfer purpose must necessarily bring the order number, the order date and client name.
The products availability has to be judged only from the credited.
The payment must 'be made payable to: ' NAMITI SRL '
PayPal
Selecting the type of PayPal payment, you will be redirected to a page on the PayPal site where in you can enter with your email address and password and make payment.
Your financial data will not be shared with Holity but they will be handled directly by PayPal.
In case of order cancellation or rejection by Holity, the amount will be refunded to your PayPal account and Holity will be not responsible for delays and / or damage during repayment.
Upon delivery of the goods the customer is required to inspect:
In case of tampering and / or breaks the customer will immediately challenge the shipment and / or delivery putting the word "SUBJECT TO INSPECTION FOR GOODS ....." (give reasons) on the delivery receipt from the courier.
The customer then must report any damage within 7 (seven) days of receipt of goods in the manner prescribed by the operator chosen for the expedition. In case the customer fails to collect within 2 (two) working days of the goods ordered and present in storage at the warehouses of courier and / or the Company due to the repeated inability to deliver to the address specified by the customer with the order, will return the goods to stores in Namiti Ltd., with charge to the account of charges for transport and storage of goods, the customer may request a new shipment of the goods, upon payment of these expenses and the new shipping cost.
English 
Italian
French
German
Spanish
