Structure : Made in PE light gray in a single block, crushproof and durable for heavy use. All inside corners are rounded and seamless for easy cleaning. Polyethylene is a material that requires a very simple maintenance and easy cleaning. E'leggero, resistant to stains, solvents, acids and wear
Insulation : polyurethane foam (density 40 Kg / m³) with a thickness of 70 mm. CFC and HCFC free. Thanks to the high thickness and density of the insulation material, the refrigerator is able to maintain the internal temperature for long periods, even when not connected to any energy source
Handles : No. 2, obtained in the same structure at both ends for easy handling of the device
Insulated lid : No. 1, hinged, made of the same material and insulation of the structure. The lid is equipped with a perimeter seal (to guarantee a perfect seal) and a special closing mechanism to latch to avoid sudden openings of the same. Provision for safety closure with padlock
Control Panel : Located at the top of the structure, (a side of the cover), and incorporates the following functions:
ON / OFF switch : instrument power switch, selectable in 2 positions
Digital electronic thermostat with alarm : microprocessor operating with 4 control buttons, controls all the functions of the refrigerator (set up and maintain the set temperature according to the needs of use, defrost, compressor operation and fans). The indoor temperature is displayed via an LED indicator light with red color with a resolution of 1 ° C. The thermostat includes its functions an audible alarm (with buzzer) and visual (with LED display) indicating temperature variations outside the programmed range. The audible alarm can be silenced through a special button
warning light Error : red for fault operation (compressor or condenser temperature is too high, due to insufficient voltage battery is not sufficiently charged, incorrect electrical connections)
refrigeration unit : mounted in the bottom of the unit, with the condensing unit consists of hermetic compressor No. 1 and No. 1 condenser finned air-cooled with a fan. Evaporator static type, that covers the 4 sides of the storage chamber, to ensure the high temperature stability, distributing the cold evenly. All components are mounted industrial type ensuring maximum reliability
Refrigerant : CFC-free R134a, a refrigerant gas derived ethane and not containing CFCs, pollutants. It can therefore be counted among the environmentally friendly gas.
Defrosting : manual, with operations to be carried out on the basis of the formation of frost on the cooling elements
type refrigeration : static, but with the element of evaporating on 4 sides inside for a high uniformity and stability of the internal temperature
Features:
Temperature range: highly versatile, adjustable from -24 ° C / + 10 ° C
Voltage (V - V / ph / Hz): 12 - 24 - 110-230 / 1 / 50-60
Spine: the cooler is supplied with two power cables, one with a Schuko type plug and the second with a cigarette lighter
Transformer: Built into the structure of the device, it can be used with all possible different voltages, by simply changing the power cord (supplied)
Holity uses PayPal and credit transfer as methods of payment.
Credit Transfer
Paying by credit transfer the order will be handled only after a bank credit receiving confirmation. Payment must be made within 7 days from date of order. Go past the deadline, the order will be automatically canceled. The bank transfer purpose must necessarily bring the order number, the order date and client name. The products availability has to be judged only from the credited. The payment must 'be made payable to: ' NAMITI SRL '
PayPal
Selecting the type of PayPal payment, you will be redirected to a page on the PayPal site where in you can enter with your email address and password and make payment. Your financial data will not be shared with Holity but they will be handled directly by PayPal. In case of order cancellation or rejection by Holity, the amount will be refunded to your PayPal account and Holity will be not responsible for delays and / or damage during repayment.
Upon delivery of the goods the customer is required to inspect:
The number of packages delivered is as indicated in the transport document
The packaging is intact and not altered even in the closing strip
In case of tampering and / or breaks the customer will immediately challenge the shipment and / or delivery putting the word "SUBJECT TO INSPECTION FOR GOODS ....." (give reasons) on the delivery receipt from the courier.
The customer then must report any damage within 7 (seven) days of receipt of goods in the manner prescribed by the operator chosen for the expedition. In case the customer fails to collect within 2 (two) working days of the goods ordered and present in storage at the warehouses of courier and / or the Company due to the repeated inability to deliver to the address specified by the customer with the order, will return the goods to stores in Namiti Ltd., with charge to the account of charges for transport and storage of goods, the customer may request a new shipment of the goods, upon payment of these expenses and the new shipping cost.
English 
Italian
French
German
Spanish
