• Safe handling: the locking strap and the three containment rings at different heights prevent the cylinder from slipping during transport in corridors and common areas.
• Multiple compatibility: accommodates 5, 7 and 14 litre cylinders, reducing the need for different trolleys in facilities with different devices.
• Optimal grip: the non-marking wheels maintain a stable grip on medical floors (stoneware, resin) without causing slips or damage to surfaces.
• Ease of sanitization: the epoxy powder coating allows for frequent cleaning and sanitization without degrading the coating.
• Maneuverability in tight spaces: low weight (4 kg) and compact dimensions allow for use in crowded wards and environments with limited passages.
• Operational ergonomics: the shaped handle reduces operator fatigue during repeated transfers throughout the day.

The trolley is intended for hospitals, clinics, nursing homes and assisted living facilities (RSA) where oxygen therapy is daily practice. It is used in intensive care, pulmonology, and geriatrics departments and during medical visits across various pavilions, facilitating the rapid transport of cylinders between patient rooms.

It also finds application in emergency services and intra-hospital transport, where speed of movement and load safety are priorities. CE compliance makes it suitable in all European healthcare contexts subject to regulatory controls.

Choose this trolley when oxygen therapy is a recurring element in your facility and you need a transport system that complies with healthcare standards. It is the right choice if your spaces include medical floors (stoneware, resin) where grip and the absence of marks are critical, or if you manage cylinders of different volumes (5, 7, 14 litres) in a single department.

It represents the operational prerequisite when safety during transport and frequency of sanitization are non-negotiable, as occurs in high biological risk environments. The constructional robustness and the 60 kg capacity also make it ideal for facilities with high patient turnover and intensive daily movement.

What is the difference compared to generic cylinder trolleys?

This trolley is specifically engineered for hospital environments: the non-marking wheels maintain grip on medical floors without leaving marks, the epoxy coating resists chemical sanitizers, and the strap locking system is designed for operational speed. A generic trolley does not guarantee these critical performances in healthcare settings.

Do the wheels damage resin or stoneware floors?

No. The grey rubber wheels are specifically non-marking, designed to grip without scratching or dirtying medical surfaces. This feature is essential in hospital environments where daily cleaning is rigorous.

Can I use it with cylinders other than 5, 7 and 14 litres?

The trolley is sized for cylinders with a diameter of 21 cm, which correspond to the 5, 7 and 14 litre sizes. Cylinders of different sizes might not lock correctly in the containment system, compromising transport safety.

What are the certifications and compliance regulations?

The trolley complies with CE marking, a fundamental requirement for marketing and use in European healthcare facilities. This compliance ensures that the product meets the safety and hygiene directives applicable to medical devices and aids used in hospitals and clinics.

How much weight can the trolley safely support?

The maximum capacity is 60 kg, sufficient for standard oxygen cylinders (a 14-litre cylinder weighs about 30 kg) and any accessories. The trolley’s self-weight is 4 kg.

How do you sanitize the trolley?

The oven-dried epoxy powder coating allows for frequent cleaning and the use of hospital detergents without deterioration. The rubber wheels and handle can be cleaned with the same chemical sanitizers used for medical surfaces.