The wall-mounted clog rack h640_29 is a professional module designed for the organization of filter zones and access to operating rooms. The structure allows technical footwear to be kept tidy and readily available, eliminating floor clutter and facilitating floor sanification operations. Made entirely of stainless steel, it responds to the rigorous hygiene protocols of hospital environments and laboratories, guaranteeing resistance to corrosion and frequent disinfection cycles.
Technical features
Material: High-resistance stainless steel
Load capacity: 40 pairs of clogs using special preformed hooks
Installation: Wall mounting for vertical space optimization
Dimensions: W.123.5 x D.13 x h.218 cm
Design: Open structure to promote footwear ventilation
Image for illustrative purposes only
User benefits
Maximum environmental hygiene: Wall mounting frees up the floor, allowing mechanical or manual cleaning without obstacles.
Resistance to detergents: Stainless steel prevents structural degradation caused by the use of aggressive chemical agents required for sterilization.
Logistical optimization: Vertical storage of 40 pairs in just 13 cm of depth maximizes capacity even in narrow corridors.
Immediate accessibility: The arrangement on separate hooks allows staff to identify and retrieve footwear quickly.
Visual order: Contributes to maintaining the decorum standards required in sterile areas and surgical departments.
Scope of application
This storage system is essential in the filter zones of operating rooms and in surgical blocks. It is primarily used in analysis laboratories, clean rooms, sterilization centers, and intensive care units. It is also suitable for pharmaceutical or food industries where access to production areas requires the mandatory change of footwear with sanitizable personal protective equipment.
Why choose it
The h640_29 model is the correct choice when it is necessary to manage a high number of operators in confined spaces. Compared to mobile trolleys, wall mounting guarantees absolute stability and a reduction in floor space requirements essential for safety in emergency routes. It is the definitive solution for eliminating the cluttered accumulation of footwear on the ground, reducing the risk of cross-contamination between sterile and non-sterile environments.
FAQ
What is the advantage of wall mounting compared to a self-supporting structure?
Wall mounting guarantees greater stability of the structure, especially at full load, and ensures that the floor remains completely free, facilitating the washing and deep disinfection procedures required by health protocols.
Is the material certified for use in sterile environments?
The clog rack is made of stainless steel, the material of choice for the medical sector due to its intrinsic bacterial resistance properties and compliance with current hospital hygiene standards.
How is the structure sanitized?
The structure can be sanitized using common hospital detergents and disinfectants. The absence of closed crevices and the zero porosity of stainless steel facilitate the complete removal of contaminants.
Holity uses PayPal and credit transfer as methods of payment.
Credit Transfer
Paying by credit transfer the order will be handled only after a bank credit receiving confirmation. Payment must be made within 7 days from date of order. Go past the deadline, the order will be automatically canceled. The bank transfer purpose must necessarily bring the order number, the order date and client name. The products availability has to be judged only from the credited. The payment must 'be made payable to: ' NAMITI SRL '
PayPal
Selecting the type of PayPal payment, you will be redirected to a page on the PayPal site where in you can enter with your email address and password and make payment. Your financial data will not be shared with Holity but they will be handled directly by PayPal. In case of order cancellation or rejection by Holity, the amount will be refunded to your PayPal account and Holity will be not responsible for delays and / or damage during repayment.
Upon delivery of the goods the customer is required to inspect:
The number of packages delivered is as indicated in the transport document
The packaging is intact and not altered even in the closing strip
In case of tampering and / or breaks the customer will immediately challenge the shipment and / or delivery putting the word "SUBJECT TO INSPECTION FOR GOODS ....." (give reasons) on the delivery receipt from the courier.
The customer then must report any damage within 7 (seven) days of receipt of goods in the manner prescribed by the operator chosen for the expedition. In case the customer fails to collect within 2 (two) working days of the goods ordered and present in storage at the warehouses of courier and / or the Company due to the repeated inability to deliver to the address specified by the customer with the order, will return the goods to stores in Namiti Ltd., with charge to the account of charges for transport and storage of goods, the customer may request a new shipment of the goods, upon payment of these expenses and the new shipping cost.
English 
Italian
French
German
Spanish
