• Controlled postural assistance: three independent motorized sections allow for specific therapeutic positioning of the patient, reducing the risk of pressure sores and circulatory complications.
• Simplified CPR maneuver: the quick release of the backrest allows for an immediate return to a horizontal plane during resuscitation interventions, without wasting time.
• Operator and patient safety: low-voltage motors with anti-crushing and anti-shearing protections reduce the risk of injury during daily use.
• Complete sanitation: stainless steel frame, removable and washable ABS thermoforms, removable HPL bed ends, and facilitated lower access allow for total decontamination of the bed between admissions.
• Quick and practical mobility: 4 non-marking swivel wheels with 2 brakes allow for easy positioning of the bed in wards and tight spaces, minimizing damage to the floor.
• Operational continuity in emergency: emergency rechargeable batteries guarantee an autonomy of approximately 10 cycles in the event of a power failure, avoiding patient immobilization.

The bed is intended for hospital wards, intensive care units, surgical wards, coronary units and residential care facilities where controlled patient positioning and the maintenance of high hygienic standards are required.

It is particularly indicated in contexts where the patient remains bedridden for prolonged periods, requires frequent mobilization, potential cardio-pulmonary resuscitation maneuvers, or is subject to treatments that benefit from controlled posture variation.

The provision for side rails and compatibility with patient lifters make the bed suitable also in environments where frequent mechanical assistance is planned.

Choose this bed when you need to guarantee precise and safe therapeutic positioning in high-intensity healthcare environments. The combination of independent motorized sections, anti-crushing protections, quick CPR release, and emergency batteries makes it suitable for wards where clinical functionality cannot be compromised.

It is the correct choice if you operate in facilities where complete and fast sanitation is a critical prerequisite: the stainless steel frame, removable thermoforms, and design with facilitated lower access meet the rigors of standard cleaning in a hospital environment.

It represents the optimal solution when operator and patient safety is a priority: low-voltage motors, integrated mechanical protections, and a handset with a lockout key control the risks of injury during daily use.

Select it if you plan to use external handling aids (lifters, hoists): the provision for side rails and the free lower space guarantee operational compatibility without subsequent modifications.

What is the difference between the thigh section and the leg section?

The thigh section is motorized and allows the patient’s thigh to be raised up to 25°, controlling blood flow and reducing swelling in the lower limbs. The leg section is gas spring servo-assisted and automatically synchronizes with the thigh movement up to approximately 35°, allowing for the natural extension of the leg without manual effort from the operator.

How is a CPR maneuver performed on this bed?

The bed features a quick backrest release which, when activated, immediately returns the backrest section to a horizontal position (0°). This allows for a transition from a therapeutic position to a completely flat plane in a few seconds, facilitating cardio-pulmonary resuscitation operations without having to move the patient.

What materials are used for sanitation?

The frame is made of stainless steel painted with thermosetting epoxy powders, resistant to hospital detergents and disinfectants. The ABS thermoforms and HPL bed ends are removable and fully washable. The facilitated lower access makes it easier to clean all surfaces, including the area under the bed, essential for complete sanitation between admissions.

What happens in case of a power failure?

The bed is equipped with emergency rechargeable batteries that guarantee autonomy for approximately 10 cycles of movement in the absence of external power. This ensures that the patient can be moved and positioned even during power outages, avoiding unwanted immobilization.

Are side rails included?

No, the compass-style side rails are an option not included in the standard supply. The bed is ready for the installation of side rails, allowing for later addition without structural changes. Note: the addition of side rails may slightly vary the overall dimensions of the product.

Does the bed comply with hospital regulations?

The bed meets the safety requirements for hospital medical devices, including anti-crushing and anti-shearing protections on the motors, an equipotential node for the prevention of electric shocks, and low-voltage motors. The design allows for the passage of lifters in the lower part and guarantees sanitation in compliance with hospital infection prevention protocols.