mon-fri 9-13 / 14.30-18.30
Shelter for public spaces in steel and wood. Dimensions: 321x151x243H cm.
Urban furniture shelter with rear walls in wood planks. Structure consisting of two vertical uprights made of galvanized steel square tube; each individual upright is complete with a base plate made of galvanized sheet metal and equipped with holes for fixing to the ground. The uprights are consolidated to the plates through triangular stiffening gussets in galvanized sheet metal. Shaped upper arches obtained by high-definition plasma cutting, connected to each other by horizontal crossbars in galvanized steel square tube; each crossbar is characterized by shaped galvanized steel ends. Back wall consisting of two crossbars (upper and lower) in galvanized steel square tube; cladding made with Nordic pine wood strips fixed on a specific perimeter frame in galvanized steel profile. Side wall consisting of a perimeter frame in galvanized steel profile; front upright in galvanized steel square tube equipped with a base plate with holes for fixing to the ground; polished edge transparent laminated glass infill, inserted into the frame with specific perimeter gaskets and supported by galvanized steel glazing beads. Roofing made of smoked compact polycarbonate, unbreakable, UV protected and particularly suitable for outdoor use; the roof is characterized at the front and back by a gutter, formed by a specific shaping of the panel, for the collection and drainage of rainwater. Bench consisting of galvanized steel profile supports designed for assembly to the rear wall, seat made with four Nordic pine wood planks, one of which has a rounded front profile. The standard finish for this product is anthracite gray. The painting technique adopted for the galvanized steel structure is thermosetting powder coating with oven baking. Assembly kit and mounting instructions included.
Technical features:
Optional
| Larghezza in millimetri | mm321.00 |
|---|---|
| Altezza in millimetri | mm243.00 |
| Profondità in millimetri | mm151.00 |
| Material | acciaio e legno |
Holity uses PayPal and credit transfer as methods of payment.
Credit Transfer
Paying by credit transfer the order will be handled only after a bank credit receiving confirmation.
Payment must be made within 7 days from date of order. Go past the deadline, the order will be automatically canceled. The bank transfer purpose must necessarily bring the order number, the order date and client name.
The products availability has to be judged only from the credited.
The payment must 'be made payable to: ' NAMITI SRL '
PayPal
Selecting the type of PayPal payment, you will be redirected to a page on the PayPal site where in you can enter with your email address and password and make payment.
Your financial data will not be shared with Holity but they will be handled directly by PayPal.
In case of order cancellation or rejection by Holity, the amount will be refunded to your PayPal account and Holity will be not responsible for delays and / or damage during repayment.
Upon delivery of the goods the customer is required to inspect:
In case of tampering and / or breaks the customer will immediately challenge the shipment and / or delivery putting the word "SUBJECT TO INSPECTION FOR GOODS ....." (give reasons) on the delivery receipt from the courier.
The customer then must report any damage within 7 (seven) days of receipt of goods in the manner prescribed by the operator chosen for the expedition. In case the customer fails to collect within 2 (two) working days of the goods ordered and present in storage at the warehouses of courier and / or the Company due to the repeated inability to deliver to the address specified by the customer with the order, will return the goods to stores in Namiti Ltd., with charge to the account of charges for transport and storage of goods, the customer may request a new shipment of the goods, upon payment of these expenses and the new shipping cost.