• Precise motorized adjustment: the electrically controlled backrest and femoral sections allow for personalized ergonomic positioning and reduce staff effort during daily maneuvers.
• Immediate CPR maneuver: the quick release of the backrest via lever allows for the fast execution of cardiopulmonary resuscitation without operational delays.
• Facilitated sanitization: removable thermoformed parts, removable HPL panels, and free space underneath facilitate deep cleaning and compliance with hygiene protocols.
• Operational safety: low-voltage motors with anti-crush protection, emergency batteries, and equipotential node guarantee the safety of the patient and staff.
• Controlled mobility: 4 non-marking wheels with 2 brakes allow for smooth movement and stable locking during procedures.
• Intelligent synchronism: the gas-spring servo-assisted leg section moves in synchrony with the femur, maintaining the patient’s anatomical alignment.

The bed is suitable for hospital wards, specialist clinics, long-term care facilities and nursing homes (RSA). It is used in contexts where it is necessary to ensure prolonged patient comfort, perform standard medical maneuvers (including resuscitation procedures), and maintain high standards of environmental hygiene. It is particularly suitable for facilities managing patients with reduced mobility or bedridden patients, where medical-nursing staff must operate frequently and quickly.

Choosing this bed is the correct choice when the healthcare facility requires a device that combines controlled motorization, quick maneuverability in emergencies, and strict hygienic compliance. It is indicated for environments where staff must frequently perform postural adjustments, resuscitation interventions, and intensive sanitization cycles. Operational prerequisites include the availability of a stable power supply (with integrated battery backup), ward spaces with at least 202 cm of useful width, and corridors that allow for the passage of hoists. The bed is the preferable solution over manual models when the volume of bedridden patients is substantial and staff must reduce physical fatigue.

What is the difference between the motorized sections and the servo-assisted one?

The backrest and femoral sections are fully motorized and controllable via remote control, allowing for precise and independent adjustments (0–70° and 0–25° respectively). The leg section is instead servo-assisted by gas springs and moves in automatic synchrony with the femur (approx. 0–35°), reducing the number of controls needed and maintaining the patient’s postural alignment.

How does the emergency power supply work?

The bed is equipped with rechargeable batteries that guarantee autonomy for approximately 10 complete adjustment cycles. In the event of a mains power failure, the patient can still change position using the battery-powered controls, ensuring operational continuity in critical situations.

Is it possible to perform cardiopulmonary resuscitation quickly?

Yes. The backrest has a quick release via a mechanical lever that allows the section to be lowered instantly, permitting the immediate execution of the CPR maneuver without technical delays. This system is independent of the electrical controls.

Which components are removable for sanitization?

The ABS thermoformed parts of the bed base and the HPL panel of the bed ends are removable and washable, facilitating deep cleaning. The structure is designed with free spaces that allow for the passage of hoists and access to the floor underneath for disinfection operations.

Which standards and certifications are applied?

The bed is manufactured according to standards for medical devices, with thermosetting epoxy powder coating, low-voltage motors with anti-crush and anti-shear protection, and an equipotential node for electrical safety. The construction specifications comply with the safety requirements for hospital beds in healthcare environments.

What are the dimensions if I add side rails?

Compass-style side rails are available as an option. Their addition involves dimensional variations compared to the standard measurements (width 202 cm, depth 94.5 cm, height 88.6 cm). For precise details on the new dimensions, it is necessary to consult the specifications of the side rail kit.