Structure strong>: made externally inmateriale plastic gray and black, non-deformable and resistant to heavy use, while the inside is made of a plate in aluminum strong> is painted white . All internal corners are rounded for easy cleaning. The aluminum is a material that combines lightness and strength. It is also well practical and easy to clean and ensures maximum hygiene. Li>
Insulation strong>: polyurethane foam (density 40 Kg / m³) with a thickness of 35 mm. CFC and HCFC free. Thanks to the high thickness and density of the insulation material, the refrigerator is able to maintain the internal temperature for long periods, even when not connected to any energy source li>
Handles strong>: No. 2, external, placed on 2 sides of the structure, with ergonomic grip, allowing easy handling of the device li>
Insulated lid strong>: No. 1, hinged, made of the same material and insulation of the structure. The lid is equipped with a perimeter seal (to guarantee a perfect seal) and a special closing mechanism to latch to avoid sudden openings of the same, can also be completely removed to facilitate the operations of loading / unloading of the material content li >
Interiors strong>: No. 1 plastic coated steel wire basket in white color, which can be completely removed for easier handling of the stored material li>
Interior Lighting strong>: Nr 1 lamp, mounted inside the storage compartment, with automatic switch every time you open the lid thanks to a special micro-switch li>
Control Panel strong>: Located at the top of the structure, (a side of the cover), and incorporates the following functions:
ON / OFF button strong>: with membrane button to turn on or off li>
Adjust buttons strong>: Nr 2 membrane buttons (+ and -) which allow the adjustment of the indoor temperature at the desired value li>
LCD Display strong>: a visualization of the internal temperature of the unit li>
Operation Lamp strong>: a signal of the device connected to the power source li>
Error light strong>: a report of a mistaken operation (eg temperature of the condenser or compressor too high, low battery, incorrect wiring, etc..) li>
ul>
li>
refrigeration unit strong>: mounted in the bottom of the unit, with the condensing unit consists of hermetic compressor No. 1 and No. 1 condenser finned air-cooled with a fan. Evaporator static type, that covers the 4 sides of the storage chamber, to ensure the high temperature stability, distributing the cold evenly. All components are mounted industrial type ensuring maximum reliability li>
Refrigerant strong>: R134a CFC-free, a gas derived ethane and CFC-free air pollutants held responsible for the ozone hole li>
Defrost: manual, with operations to be carried out on the basis of the formation of frost on the cooling elements li>
Refrigeration: static, but with the element of evaporating on 4 sides inside for a high uniformity and stability of the internal temperature li>
Temperature range: highly versatile, adjustable from -18 ° C / + 10 ° C li>
Voltage (V - V / ph / Hz): 12 - 24 - 110-230 / 1 / 50-60 li>
Spine: the cooler is supplied with two power cables, one with a Schuko type plug and the second with a cigarette lighter li>
Transformer: Built into the structure of the device, it can be used with all possible different voltages, by simply changing the power cord (supplied) li>
ul>